QuickPrime is used to clean and prepare liner surfaces for proper adhesion of splicing or patching tape.
Preparation of Splicing Surfaces:
Splice Surfaces must be clean, dry, and free of foreign materials and excess dusting agent. Clean with broom or rags to remove contaminates.
Method of Application:
Apply QuickPrime Plus LVOC at the rate of 200-250 square feet per gallon per side to the splicing surfaces.
Note: Use of neoprene or nitrile gloves and eye protection with side shields is required during application.
Warning! This product contains a chemical known to the State of California to cause birth defects or other reproductive harm.
Ingredients: Benzene, 1 Chloro-4-(Trifluoromethly) Toluene.
Seaming & Patching Pond Liners
This item ships by UPS Ground only, no expedited methods
Products
Featured Items
){kind=small}