Most orders over $100.00 ship for FREE via UPS Ground in the 48 contiguous states of the U.S.
There are some items that due to their weight and low cost cannot be shipped free. This is noted on those items. The website will calculate and show a shipping charge on all orders. If your order meets the requirements for free or discounted shipping, this amount will be deducted by us manually after the order is placed. Shipping on orders under $100.00 and/or orders being shipped by a method other than UPS will be calculated by UPS rates based on the actual product weights. To see the shipping charge of these orders, place all items in your cart and begin the checkout process. Some other items have a preset shipping charge as noted on the item's description. International shipments may be subject to brokerage fees and other charges collected on delivery.
Free Shipping Does NOT Apply to the following items: Live Plants, Cypress Garden Decor, Pond Liner, Pond Salt, Aquatic Soil, Island Planter Soil, PVC pipe, Half Barrel Container, Octagonal Container, Dekorra Artifical Stone, Replications Artificial Stone & the larger Ultima II Filters (6,000 & up).
Step 1 - Ensure the liner is dry and free of mud and other contaminants.
Step 2 - Apply the QuickPrime Plus Primer by pouring a small amount onto the scrubber pad and applying it to the surface of the PondGard panel beyond the perimeter of the area to be repaired with a patch.
Step 3 - Test the primer flash-off by touching the primed area with your finger and pushing forward at an angle. The primer should not string as your finger is moved up and away.
Step 4 - Install the QuickSeam patch by peeling away the release paper and placing the patch over the damaged area of the liner.
Note: Edges of the QuickSeam patches may be rounded or cut diagonally to prevent peeling.
Step 5 - Roll the patch evenly over the area to be repaired in order to properly mate the patch and liner together.
Step 1 - Ensure the liner is dry and free of mud and other contaminants.
Step 2 - Apply the QuickPrime Plus Primer by pouring a small amount onto the scrubber pad and applying it to the surface of the PondGard panel beyond the perimeter of the area to be repaired with a patch.
Step 3 - Test the primer flash-off by touching the primed area with your finger and pushing forward at an angle. The primer should not string as your finger is moved up and away.
Step 4 - Install the QuickSeam patch by peeling away the release paper and placing the patch over the damaged area of the liner.
Step 5 - Roll the patch evenly over the area to be repaired in order to properly mate the patch and liner together.